Lumiform and Mobiess both replace paper checklists with mobile inspections, and at first glance they cover a lot of the same ground: both let teams carry out audits and inspections on a phone or tablet, capture photos as evidence, log actions when something is wrong and report on the results. Both are also used for fire safety, from fire door inspections to fire risk assessments. Once you look at how each product is built, however, it becomes clear that they start from different questions, and that this shapes almost every feature that follows.
The difference becomes clearest when you look at what each product was designed to work alongside. Mobiess was built for facilities management providers that already run a CAFM or IWMS system and need their engineers to capture inspections, asset surveys and work orders on site, so its data flows back into that central system. Organizations that run their own sites rarely have such a system for their inspections, however, and their challenge is a different one: keeping standards consistent across locations that no manager can oversee in person. This is the problem Lumiform was built to solve, which is why forms, corrective actions, reports and analytics work together in one focused system, where every check is carried out the same way and every issue stays visible until someone has fixed it.
In this comparison, we look at what these different starting points mean in practice, from the inspection itself and the follow-up of issues to reporting, integrations and pricing. Since fire safety is where the two products overlap most for building operators, we use it as a recurring example throughout, while also explaining where each product reaches beyond it.
What is Lumiform?
Lumiform is a specialized software for businesses with frontline teams to run inspections, audits and checklists at scale across distributed operations. It was founded in Berlin in 2019 and is used by mid-size and large organizations such as multi-site retailers, restaurant chains, logistics fleets, warehouse operators and manufacturers, which all face the same challenge: keeping standards consistently high across teams that no manager can oversee in person.
Teams build digital forms around their own standards without IT knowledge, complete inspections on mobile even without a connection and turn every failed check into a corrective action with an owner and a deadline. Since the results flow straight into audit-proof reports and analytics across all sites, managers can see where standards are met and where they slip without collecting individual reports. Companies such as EDEKA, AmRest and Virgin Media rely on Lumiform, which is rated 4.6 on G2 and hosts customer data in Frankfurt, Germany, by default.
For fire safety, this means that fire door walks, extinguisher checks and fire risk assessments can run in the same system as every other inspection an organization carries out. Motel One, for example, has standardized technical audits across 104 hotels with Lumiform, including its fire safety inspections.
What is Mobiess?
Mobiess is a UK provider of mobile data collection software for the facilities and asset management sector, founded in 2009 by Karl Horner. Its platform combines four modules: audits and inspections, asset data capture, mobile work orders and job management, and fire safety compliance. Mobiess says it is used by more than 600 organizations, including facilities management providers such as Mitie, Skanska UK and VINCI Facilities.
In January 2024, Mobiess was acquired by Bellrock, a UK property and facilities management group, and now sits within Bellrock Technologies alongside Concerto, Bellrock’s CAFM and IWMS software. Mobiess continues to position itself as an independent platform that can integrate with other back-office systems as well. This reflects its core design: rather than replacing an organization’s existing systems, Mobiess acts as the mobile layer through which engineers capture inspections, asset data and work orders on site before the information flows back into the central system.
For fire safety, Mobiess offers a dedicated module that covers inspections such as fire door checks as well as PAS 79 fire risk assessments for commercial and residential premises.
Lumiform vs Mobiess: comparison summary
| Lumiform | Mobiess | |
|---|---|---|
| Platform focus | Inspections, audits and checklists | Inspections, asset surveys, work orders and fire safety compliance |
| G2 reviews | Rated 4.6 on G2 | No reviews yet |
| Pricing | User bundles or per location, with lower costs per user as the rollout grows | Not published |
| Mobile app | Native iOS and Android apps with full offline mode | Mobile apps with offline data collection |
| Form builder | Forms built without IT knowledge, with conditional logic, scoring and reusable components | Templates that can be customized, plus custom question templates |
| AI | AI form creation, file upload to form, photo validation, translations and analytics chat | Not publicly documented |
| Corrective actions | Triggered automatically or created on the spot, with owners, deadlines, reminders and photo proof | Actions and remedials that can be logged, assigned and categorized |
| Analytics | Unlimited dashboards, scheduled email reports and AI analytics | Reporting and analytics |
| Work orders | Not offered | Mobile work order and job management |
| Asset management | Assets are inspected as entities but not managed | Asset data capture, condition surveys and asset registers |
| Integrations | REST API, Power BI, SharePoint, databases, Zapier, Make and single sign-on | CAFM, IWMS and CRM systems, including Bellrock’s Concerto |
| Data hosting | Frankfurt, Germany, by default, with sovereign hosting on StackIt available | Not published |
The summary table shows that Lumiform and Mobiess overlap in the basics, yet the real differences only become visible when you look at how each feature works in daily use. The following sections therefore compare both products feature by feature, starting with how inspections are built and carried out, then moving to what happens when something is wrong, how results are reported, and how each product fits into an organization’s other systems. Since fire safety is where the two products meet most often, we use a fire door inspection as a recurring example, so that the differences stay concrete rather than abstract.
1. Building and running inspections
An inspection tool only works if the forms in it match the way an organization actually inspects, which is why both Lumiform and Mobiess let teams build their own forms without programming. Mobiess does this through a drag-and-drop template designer with all common data entry types, and it adds a step that facilities management providers in particular will value, since templates can be trialled as drafts before they reach users or clients. Lumiform’s form builder offers a similar range of response types, but it is designed for organizations that maintain many forms at once, so questions, sections and entire pages can be saved as reusable components and used across every form, which keeps standards identical even when dozens of teams build their own checklists.
The products begin to differ more clearly once a form is used in many different buildings. Both rely on conditional logic to show or hide questions depending on earlier answers, but Lumiform also adapts each form to the place it is used, because every site, vehicle or asset carries its own attributes. A fire door inspection therefore skips the section on automatic opening vents in buildings that don’t have them, and it opens with the address and responsible manager already filled in, so inspectors spend their time on the door rather than on the paperwork around it.

The same depth shows in how results are scored. Mobiess lets teams enable scoring, which already turns a list of answers into a comparable result, while Lumiform documents several methods, from weighted sections to deduction and category scoring, and it can act on the outcome as well, since a score below a set threshold triggers follow-up forms or corrective actions automatically. A fire door inspection that fails on several points thus leads straight to the next step instead of waiting for someone to notice the score.
Getting started is where the two take the most different routes. Mobiess offers more than 50 standard compliance inspections, from fire door checks to gas safety certificates, which gives UK facilities teams familiar formats from day one. Lumiform assumes instead that most organizations already have checklists they trust, so AI file upload turns existing PDFs, spreadsheets or photos of paper forms into digital forms automatically, and AI form creation builds new ones from a short description. On site, both apps work offline, which matters in the stairwells and plant rooms where fire doors are often found, and while Mobiess reads NFC tags, QR codes and barcodes, Lumiform uses QR codes to open the right form for each door and adds AI photo validation, which checks on the spot whether a photo shows what the organization requires, such as a clearly visible closer and intact seals.
For facilities management teams that want a capable designer with ready-made UK compliance formats, Mobiess covers the inspection itself well. Organizations that run inspections across many sites, however, will get more from Lumiform, because its forms adapt to each location, its scoring acts on the result and its AI turns existing paperwork into working forms from the start.
2. Following up on issues
Finding a problem is only half of an inspection, because a defect that is recorded but never fixed leaves a building exactly as unsafe as before. What matters therefore is how reliably each tool turns a finding into a task, gets that task to the right person and proves that it was done. The table below follows a failed fire door check through each step.
| Step | Lumiform | Mobiess |
|---|---|---|
| Creating the action | Created automatically when a check fails, with fields such as assignee, priority and deadline preset by the manager, or added on the spot by the inspector | Actions and remedials logged during the inspection |
| Assigning the action | Sent automatically to the person responsible for that specific site | Actions can be assigned and categorized |
| Following up | Reminders before the deadline and escalations when it passes, by push notification, email or SMS | Not publicly documented |
| Proving the fix | Photo or file proof can be required before an action is closed, with optional approval | Not publicly documented |
| External contractors | Receive actions by email and close them without a license | Repairs can be handled through Mobiess’s separate work order module, which flows back to a CAFM system |
| Record of the fix | Every change is logged and the action appears in the inspection report | Not publicly documented |
The table shows that both products let teams log and assign actions, so neither leaves a defect without an owner. The difference lies in how much of the follow-up runs without anyone having to chase it. In Lumiform, a fire door that fails its check creates a corrective action on its own, sends it to the facilities manager responsible for that building and keeps reminding them until the action is closed, and a photo of the repaired closer can be required as proof before it counts as done. Mobiess, by contrast, connects the finding to the wider facilities workflow, since the repair can become a work order that flows back into the organization’s CAFM system. For facilities management providers whose engineers already work through CAFM jobs, that is a natural route, while organizations without such a system will find that Lumiform covers the entire path from defect to documented fix in one place.
The graphic below shows how Lumiform handles this path in practice, following a failed fire door check from the moment it is found to the moment the repair is documented, without anyone having to chase it along the way.

3. Fire safety inspections and fire risk assessments
Fire safety deserves a closer look in this comparison for two reasons. First, it is where Lumiform and Mobiess overlap most directly, since Mobiess has built a dedicated fire safety compliance module, while fire safety checks are among the inspections that almost every Lumiform customer with buildings carries out. Second, it is an area where gaps in inspections and their follow-up carry the most serious consequences, because a fire door that doesn’t close or an alarm that doesn’t sound only becomes visible when it is needed most. How each product handles fire safety therefore says a lot about how well it supports building operators in general.
The clearest difference appears in fire risk assessments. Mobiess supports fire risk assessments for commercial and residential premises based on PAS 79, the British methodology that most UK fire risk assessors follow, so assessors can work through a structure that is already in place. Lumiform, by contrast, lets teams build the PAS 79 structure in its form builder, which takes some setup at the start but then puts the action plan at the center, since every recommendation from the assessment becomes a tracked corrective action with an owner and a deadline. For assessors whose work ends with the report, Mobiess offers the quicker start, whereas organizations that have to carry out the recommendations across many buildings benefit more from Lumiform’s follow-up, as our comparison of fire risk assessment software explains in more detail.
Between assessments, fire safety depends on recurring checks such as weekly fire alarm tests, fire door walks and monthly extinguisher checks, and this is where Lumiform’s scheduling makes the biggest difference. Each check is scheduled per building, and when one becomes overdue, the responsible manager is alerted by push notification, email or SMS, so a missed test is noticed within hours rather than at the next audit. Since every call point, extinguisher or fire door can carry its own QR code, the record also shows exactly which device was checked, and a history per device reveals which ones haven’t been tested for a while. Mobiess supports QR codes, NFC tags and barcodes in the field as well, and it works offline just like Lumiform, but it does not publicly document scheduling with escalation for recurring fire safety checks. Our comparisons of fire alarm inspection software and fire safety inspection software look at these recurring checks in more depth.
Both products also produce documentation, although for different purposes. Mobiess supports typical UK fire safety paperwork such as annual fire inspections and fire extinguisher certificates, which suits facilities management providers that issue these documents to their clients. Lumiform generates an audit-proof report the moment an inspection is submitted, and organizations that want their records to look exactly like their existing fire logbook can reproduce that layout with the Word report builder. Neither product, however, replaces the certified fire safety contractor who services extinguishers, alarms and sprinklers, so both are best understood as the inspection layer that records the checks and makes sure their findings are acted on.
The difference becomes most visible across many buildings. A facilities management provider using Mobiess typically manages fire safety work for its clients through its CAFM system, while an organization running its own sites needs to see at a glance where fire checks are overdue or defects remain open. Lumiform’s dashboards show exactly that across every building, which is how Motel One, for example, keeps its technical audits, including fire safety inspections, consistent across 104 hotels.
For UK assessors and facilities management providers who mainly need ready-made fire safety formats, Mobiess offers a solid starting point. Organizations responsible for fire safety across their own buildings, however, will find that Lumiform covers the full cycle, from the scheduled check to the documented fix, in one system.
4. Reporting, integrations and data
Once inspections are done, their results have to reach the people who make decisions, and this is where the two products follow their different starting points most clearly. Mobiess is built to pass its data on to the central system an organization already uses, and it can integrate with most common CRM, CAFM and IWMS systems. Since its acquisition, it has also been closely tied to Concerto, Bellrock’s own CAFM and IWMS software, which Bellrock describes as a way to capture field engineers’ data straight into Concerto. For facilities management providers that run their operations through such a system, this means inspection results end up where the rest of their work already lives, and Mobiess complements that with its own reporting and analytics.
Lumiform, on the other hand, assumes that many organizations have no central system for their inspections, so reporting and analysis happen within Lumiform itself. Every submitted inspection produces an audit-proof report straight away, which can be exported as PDF, Word, Excel or CSV and sent automatically to the right people. Dashboards then show results across all sites, broken down by location, region or time period, and they can be emailed on a schedule, so a head of facilities receives a monthly overview of fire safety checks across every building without logging in. Managers who want a quick answer can also ask AI analytics questions about their inspection data in a chat, for example which buildings had the most failed fire door checks last quarter.
The graphic below shows this path, from a fire safety check completed on site to the reports, dashboards and other systems where its results are used.

Where Lumiform does connect to other systems, it does so in both directions. One-click integrations store reports in SharePoint, OneDrive or Google Drive, send inspection data to databases and deliver it to Power BI every day, while Zapier, Make and Power Automate link it to thousands of other apps. A REST API connects Lumiform with ERP and other internal systems, which is how enterprise customers bring their sites, users and assets in automatically, and single sign-on lets employees log in with their company account. The difference from Mobiess is therefore less about whether integration is possible and more about where the inspection data primarily lives: in Mobiess it flows into the central back-office system, while in Lumiform it stays in a dedicated inspection system that can feed other tools.
On data hosting, Lumiform hosts customer data in Frankfurt, Germany, by default, with hosting providers certified to ISO 27001 and SOC 2, and enterprise customers can choose sovereign hosting on StackIt, a German cloud provider operating exclusively under German and European law. Mobiess does not publicly state where its customer data is hosted, so organizations with strict data residency requirements should ask about this early in the buying process.
For facilities management providers that already run a CAFM or IWMS system, Mobiess’s design keeps everything in one place. Organizations without such a system, or those that want inspection results analyzed where they are captured, will find that Lumiform’s reporting, dashboards and AI analytics give them that overview without depending on another platform.
5. Pricing, support and reviews
Since both vendors price according to the size and needs of each organization, the table below compares how their pricing and support are structured rather than listing exact prices.
| Lumiform | Mobiess | |
|---|---|---|
| Pricing model | User bundles, or per location for multi-site businesses, with lower costs per user as the rollout grows | Not published |
| Free trial | Two weeks, with no credit card required | Not published; demos available on request |
| Onboarding and support fees | None | Not published |
| Contract term | One year, with multi-year agreements available | Not published |
| Support | Team based in Germany, included for every user | Not published |
| Independent reviews | Rated 4.6 on G2 | No reviews on G2 or Capterra yet |
One practical difference is how much independent feedback is available before buying. Since Lumiform is rated 4.6 on G2, prospective customers can read how other organizations use it before speaking to sales. Mobiess has no reviews on G2 or Capterra yet, although it points to well-known facilities management customers such as Mitie, Skanska UK and VINCI Facilities, so buyers considering Mobiess should ask for references from organizations similar to their own.
Which software works best for your organization?
Lumiform and Mobiess both digitize inspections well, including fire safety checks, so the choice depends less on whether a tool can capture an inspection and more on what an organization needs to happen around it.
Mobiess is the stronger fit for facilities management providers that already run their work through a CAFM or IWMS system. Its four modules cover inspections, asset surveys, work orders and fire safety compliance in one mobile platform, and since it passes data back to the central system, engineers can capture everything on site while the back office keeps working as before. Organizations that use Bellrock’s Concerto, or that need asset registers and job management alongside their inspections, will find that Mobiess fits naturally into the way they already operate.
Lumiform is the stronger fit for organizations that run inspections across their own sites and need them carried out the same way everywhere, such as restaurant chains, retailers, hotels, warehouses and manufacturers. Because forms adapt to each location, failed checks turn into corrective actions automatically and results are analyzed across every site, managers no longer depend on chasing people or collecting reports to know where standards slip. For fire safety in particular, this means every scheduled check is tracked, every defect is followed up until it is fixed, and every building is visible from head office, all in one focused system that is rated 4.6 on G2 and can be rolled out across 100 sites in one to two weeks.
If your organization is weighing both options, a useful question to start with is where your inspection results need to end up. If the answer is a central facilities system that runs your work orders and assets, Mobiess is worth a closer look. If the answer is a clear picture of how every site meets its standards, with every issue fixed and documented, Lumiform is built for exactly that.

Methodology and sources
This comparison is based on publicly available information as of November 2026. For Mobiess, we used its website and product descriptions, its app store and G-Cloud listings, Bellrock’s announcements about the acquisition, and its profiles on G2 and Capterra. For Lumiform, we used its product documentation. We did not test Mobiess hands-on, so where a capability is marked as not publicly documented, this means Mobiess does not describe it publicly, not necessarily that it is missing. Since both products continue to develop, we recommend confirming the details that matter most to you in a demo with each vendor.

