Farm Inspection Checkliste Template

Digitalize this paper form now

Register for free on lumiformapp.com and conduct inspections via our mobile app

• Cut inspection time by 50%
• Uncover more issues and solve them 4x faster
• Select from over 4000 expert-proofed templates

★★★★★

★★★★★

Rated 5/5 stars on Capterra

Farm Inspection Checkliste Template

Audit

LOAD OUT

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial" type

Yes No N/A

1.7 All power supplies protected by RCD, tested daily on generators

Yes No N/A

2. MACHINE USE

2.1 Work instructions signed off by operator for the machine in use

Yes No N/A

2.2 All guarding for machine in place and operatinal

Yes No N/A

2.3 Are Fork lifts driven safely

Yes No N/A

2.4 Operators are following documented procedures when using machines

Yes No N/A

2.5 Are walk behind trolley jacks in good order

Yes No N/A

2.6 Are walk behind trolley jacks being operated in a safe manner

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timer / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level ground

Yes No N/A

3.4 persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Is PPE in place and available?

Yes No N/A

4.3 Are trapping points guarded?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operating smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are stairs/passageways non slip?

Yes No N/A

4.9 Are all machines in working order?

Yes No N/A

4.10 Are Stanley knives retractable

Yes No N/A

4.11 Are Stanley knives being used in a safe manner

Yes No N/A

4.12 Are marked walkways clear and visible

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Are hi-visibility vest being warn

Yes No N/A

5.5 Are freezer coats in good condition

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is corect PPE being worn for the task preformed

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of ice and strapping?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

(check name not set)

BONING ROOM

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial" type

Yes No N/A

1.7 All power supplies protected by RCD, tested daily on generators

Yes No N/A

2. MACHINE USE

2.1 Work instructions signed off by operator for the machine in use

Yes No N/A

2.2 All guarding for machine in place and operatinal

Yes No N/A

2.3 Bandsaw guards set at correct height for product cut

Yes No N/A

2.4 Operators are following documented procedures when using machines

Yes No N/A

2.5 Machine blades are sharp

Yes No N/A

2.6 Air driven tools are i good order and run smoothly

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timer / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level ground

Yes No N/A

3.4 persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Are sterilisers stable?

Yes No N/A

4.3 Are trapping points guarded?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operating smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are knives safely pouched and secured?

Yes No N/A

4.9 Are saw cut off switches working?

Yes No N/A

4.10 Are all tables and platforms secure?

Yes No N/A

4.11 Is PPE in place and available?

Yes No N/A

4.12 Is ban-saw safe & operational?

Yes No N/A

4.13 Are de-rinder machines safe & operational?

Yes No N/A

4.14 Are trapping points guarded?

Yes No N/A

4.15 Are stairs/passageways non slip?

Yes No N/A

4.16 Are trolley/bin wheels in good order?

Yes No N/A

4.17 Are all machines in working order?

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Mesh glove

Yes No N/A

5.5 Kevlar Glove

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is corect PPE being worn for the task preformed

Yes No N/A

5.8 Is the knife sharpening equipment provided in good order

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of fat, bone, trim & waste?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

(check name not set)

OFFAL ROOM

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial' type

Yes No N/A

1.7 All power supplies protected by RCD, tested daily on generators

Yes No N/A

2. MACHINE USE

2.1 Work instructions signed off by operator for the machine in use

Yes No N/A

2.2 All guarding for machine in place and operational

Yes No N/A

2.3 Bandsaw guards set at correct height for product cut

Yes No N/A

2.4 Operators are following documented procedures when using machines

Yes No N/A

2.5 Machine blades are sharp

Yes No N/A

2.6 Air driven tools are in good order and run smoothly

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timber / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level grond

Yes No N/A

3.4 Persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Are sterilisers stable?

Yes No N/A

4.3 Are steriliser gate valves operational?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operationg smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are knives safely pouched and secured?

Yes No N/A

4.9 Are saw cut off switches working?

Yes No N/A

4.10 Are all tables and platforms secure?

Yes No N/A

4.11 Is PPE in place and avaiable?

Yes No N/A

4.12 Is ban-saw safe & operational?

Yes No N/A

4.13 Are de-rinder machines safe & operational?

Yes No N/A

4.14 Are trapping points guarded?

Yes No N/A

4.15 Are stairs/passageways non slip?

Yes No N/A

4.16 Are trolley/bin wheels in good order?

Yes No N/A

4.17 Are all machines in working order?

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Mesh glove

Yes No N/A

5.5 Kevlar Glove

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is correct PPE being worn for the task preformed

Yes No N/A

5.8 Is the knife sharpening equipment provided in good order

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of fat, bone, trim & waste?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

(check name not set)

RR MANUFACTURING

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial" type

Yes No N/A

1.7 All power supplies protected by RCD, tested daily on generators

Yes No N/A

2. MACHINE USE

2.1 Work instructions signed off by operator for the machine in use

Yes No N/A

2.2 All guarding for machine in place and operational

Yes No N/A

2.3 Air driven tools are in good order and run smoothly

Yes No N/A

2.4 Operators are following documented procedures when using machines

Yes No N/A

2.5 Machine blades are sharp

Yes No N/A

2.6 Are Trolley Jacks used correctly

Yes No N/A

2.7 Bandsaw guards set at correct height for product cut

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timber / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level ground

Yes No N/A

3.4 Persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Are sterilisers stable?

Yes No N/A

4.3 Are steriliser covers operational?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operating smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are knives safely pouched and secured?

Yes No N/A

4.9 Are saw cut off switches working?

Yes No N/A

4.10 Are all tables and platforms secure?

Yes No N/A

4.11 Is PPE in place and available?

Yes No N/A

4.12 Are cut out switches operational on guards

Yes No N/A

4.13 Is floor cleaning equipment in good order

Yes No N/A

4.14 Are trapping points guarded?

Yes No N/A

4.15 Are stairs/passageways non slip?

Yes No N/A

4.16 Are trolley/bin wheels in good order?

Yes No N/A

4.17 Are all machines in working order?

Yes No N/A

4.18 Are cutting benches set at correct height for each worker

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Mesh glove

Yes No N/A

5.5 Kevlar Glove

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is correct PPE being worn for the task preformed

Yes No N/A

5.8 Is the knife sharpening equipment provided in good order

Yes No N/A

5.9 Are employee's knives sharp

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of fat, bone, trim & waste?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

(check name not set)

KILL FLOOR

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial" type

Yes No N/A

1.7 All power supplies protected by RCD, tested daily on generators

Yes No N/A

2. MACHINE USE

2.1 Work instructions signed off by operator for the machine in use

Yes No N/A

2.2 All guarding for machine in place and operational

Yes No N/A

2.3 Air driven tools are in good order and run smoothly

Yes No N/A

2.4 Operators are following documented procedures when using machines

Yes No N/A

2.5 Are machine blades sharp

Yes No N/A

2.6 Are Trolley Jacks used correctly

Yes No N/A

2.7 Are hock cutters properly guarded?

Yes No N/A

2.8 Are rise and fall platforms identified and operated safely?

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timber / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level ground

Yes No N/A

3.4 Persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Are sterilisers stable?

Yes No N/A

4.3 Are steriliser drains operational?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operating smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are knives safely pouched and secured?

Yes No N/A

4.9 Are stands secure?

Yes No N/A

4.10 Are all tables and platforms secure?

Yes No N/A

4.11 Is PPE in place and available?

Yes No N/A

4.12 Are cut out switches operational on guards

Yes No N/A

4.13 Is floor cleaning equipment in good order

Yes No N/A

4.14 Are trapping points guarded?

Yes No N/A

4.15 Are stairs/passageways non slip?

Yes No N/A

4.16 Are trolley/bin wheels in good order?

Yes No N/A

4.17 Are all machines in working order?

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Mesh glove

Yes No N/A

5.5 Kevlar Glove

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is correct PPE being worn for the task preformed

Yes No N/A

5.8 Is the knife sharpening equipment provided in good order

Yes No N/A

5.9 Are employee's knives sharp

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of fat, bone, trim & waste?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

(check name not set)

CLEANERS

1. ELECTRICAL EQUIPMENT

1.1 Leads and power tools within test period

Yes No N/A

1.2 All leads are off the ground on lead stands or placed as not to sustain damage

Yes No N/A

1.3 Are residual current devices being used

Yes No N/A

1.4 Power tools and leads are in good condition and no damage taped up

Yes No N/A

1.5 Power leads do not exceed 25m for a 1mm core size

Yes No N/A

1.6 All power leads are "commercial" type

Yes No N/A

2. MACHINE ISOLATION

2.1 There is a written isolation and tag out procedure that describes the system of work

Yes No N/A

2.2 The procedure is consistent with and incorporates the key elements of the actual system of work being practised

Yes No N/A

2.3 The procedure is readily accessible by employees

Yes No N/A

2.4 The procedure is generally accepted by employees

Yes No N/A

2.5 The procedure is authorised by the Manager's signature

Yes No N/A

2.6 Employees are assessed before commencing work to ensure that the employee is competent in the system of work

Yes No N/A

2.7 Employees are retrained and reassessed whenever the system of work is changed

Yes No N/A

2.8 A record is made of the instruction, training, retraining, assessment or reassessment given to employees

Yes No N/A

3. LADDERS

3.1 Ladders are marked industrial use only. timber / fibre glass reinforced

Yes No N/A

3.2 Ladders extend 1m above access / working platform and securely tied off

Yes No N/A

3.3 Placed on firm level ground

Yes No N/A

3.4 Persons not working off ladders

Yes No N/A

3.5 Platform work is carried out safely

Yes No N/A

4. WORK AREA

4.1 Are work areas adequately lit?

Yes No N/A

4.2 Are sterilisers stable?

Yes No N/A

4.3 Are steriliser drains operational?

Yes No N/A

4.4 Are all emergency stop buttons working?

Yes No N/A

4.5 Are all safety guards in place?

Yes No N/A

4.6 Are conveyors operating smoothly?

Yes No N/A

4.7 Are safe lifting procedures being followed

Yes No N/A

4.8 Are knives safely pouched and secured?

Yes No N/A

4.9 Are stands secure?

Yes No N/A

4.10 Are all tables and platforms secure?

Yes No N/A

4.11 Is PPE in place and available?

Yes No N/A

4.12 Are cut out switches operational on guards

Yes No N/A

4.13 Is floor cleaning equipment in good order

Yes No N/A

4.14 Are trapping points guarded?

Yes No N/A

4.15 Are stairs/passageways non slip?

Yes No N/A

4.16 Are trolley/bin wheels in good order?

Yes No N/A

4.17 Are all machines in working order?

Yes No N/A

5. PERSONAL PROTECTIVE EQUIPMENT (PPE)

5.1 Safety helmets

Yes No N/A

5.2 Safety glasses being worn

Yes No N/A

5.3 Hearing protection

Yes No N/A

5.4 Gloves

Yes No N/A

5.5 Garters

Yes No N/A

5.6 Steel cap boots

Yes No N/A

5.7 Is correct PPE being worn for the task preformed

Yes No N/A

6. ADMINISTRATIVE

6.1 Have all employees been issued with work instructions and signed off as competent

Yes No N/A

6.2 Amenities cleaned and stocked daily

Yes No N/A

6.3 Toolbox talks carried out weekly / fortnightly

Yes No N/A

6.4 Register of injuries in Injury / Accident book at each First Aid Station

Yes No N/A

7. HOUSEKEEPING

7.1 Are emergency exits clear?

Yes No N/A

7.2 Is floor clear of fat, bone, trim & waste?

Yes No N/A

7.3 Are floors clear of trip hazards?

Yes No N/A

7.4 Are stairs/passageways clear?

Yes No N/A

Add signature

compiled by:

Name and Position

Date:

Select date

Share this template:

Please note that this checklist template is a hypothetical appuses-hero example and provides only standard information. The template does not aim to replace, among other things, workplace, health and safety advice, medical advice, diagnosis or treatment, or any other applicable law. You should seek your professional advice to determine whether the use of such a checklist is appropriate in your workplace or jurisdiction.