close
lumiform
Lumiform Mobile audits & inspections
Get App Get App

Daily Warehouse Inspection Checklist

A daily warehouse inspection checklist is a tool used by warehouse managers to ensure that the warehouse is operating safely and efficiently. It includes a list of items to be checked on a daily basis, such as checking for damaged equipment, ensuring proper storage of materials, and checking fire safety measures. The checklist helps to identify potential hazards and prevent accidents before they occur.

Downloaded 146 times
Audit
Section 1: Product in Block Stack
1.1 Block stacks are straight (no uneven or leaning stacks, no overhang)
1.2 Block stacks positioned in correct area ( i.e. behind line)
1.3 Block stacks are built to the height specified for the product, or according to DC requirements
1.4 Block stacks do not contain damaged stock or pallets
Section 2: Product in racking
2.1 Positioned squarely, not leaning or pushing through the other side
2.2 Where full pallets are wrapped, they are wrapped securely
2.3 Stock is in good condition (no damages or wet stock)
2.4 Racking is in good condition (no bent beams or other damages)
2.5 Pallets are in good condition (no damages)
Section 3: Housekeeping and General Warehouse condition
3.1 Ceiling lights working
3.2 Aisles and walkways free of plastic, pallets, rubbish
3.3 Stock not stored on floor, always on a pallet
3.4 Plastic removed from empty pallets
3.5 Minimum clearance around emergency exits, fire equip and sprinklers = 1 metre
3.6 Battery change/refuel area free of hazards ( i.e. acid build up, bare wires, liquid on floor)
3.7 Dock levellers and dock door area clean and free of hazards
3.8 Stretch wrapper areas clean and free of hazards
Section 4: Action items corrected or rectified
Item number
Actioned by
Date Actioned
Comments (optional)
Section 5: Report complete
Inspector Signature
Share this template:

This post is also available in: Español

Ensure Safety and Efficiency with Daily Warehouse Inspection Checklist


A daily warehouse inspection checklist is a document that serves as a tool for warehouse managers to ensure that the warehouse is operating safely and efficiently. The checklist typically includes a list of items that need to be checked on a daily basis, such as the condition of the warehouse floors, the status of the loading dock doors, and the safety of the storage racks.


By performing these inspections on a regular basis, warehouse managers can identify potential hazards and take corrective actions before accidents or incidents occur. For example, if a damaged storage rack is identified during the inspection, the warehouse manager can take immediate steps to remove the damaged rack and prevent any items stored on it from falling and causing damage or injury.


The daily warehouse inspection checklist may also include items related to fire safety, such as ensuring that fire extinguishers are in their designated locations, checking that exit doors are unobstructed, and verifying that the sprinkler system is functioning properly.

Please note that this checklist template is a hypothetical appuses-hero example and provides only standard information. The template does not aim to replace, among other things, workplace, health and safety advice, medical advice, diagnosis or treatment, or any other applicable law. You should seek your professional advice to determine whether the use of such a checklist is appropriate in your workplace or jurisdiction.
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.