Lumiform Mobile audits & inspections
Get App Get App

Decide if products are finished with a final visual inspection checklist template

A final visual inspection checklist helps assessors identify defects easily and report whether they comply with the standards or not. Inspectors can use the template to capture photo evidence of defects and report their findings in a concise and organized manner. This makes it easy for managers to quickly assess the state of a product and make decisions about what action to take.

Downloaded 92 times
LV Box
Front view LV door
Component Inside LV Box
LV door ( Serial No Component )
Relay Serial Number
Metering Serial Number
Bus Wire
Top Area
CB / Contactor / MTX
Name plate
Front view
Rear view
Lateral view ( left, right )
VT serial no. ( MTX )
Cassette front view
Cassette lateral view ( left, right )
Interlock LV plug
Mechanism rack in / out
MV Door
Front view
Rear view ( door mechanism )
Cubicle Name plate
Cable Area
Lower Door
Pintu tampak dari depan
Earting box & keys lock
Busbar cables connection
Gland plate
Foto Gland plate dan heater
VT Area
Using VT ?
VT Serial Number
VT Serial Number
VT Compartment
Contact Join Fuse VT
Foto dari depan jika tidak bisa, maka foto dari belakang
CT Area
Serial no CT ( each CT )
CT Serial Number
Busbar CT Connection
Earthing switch blade
Foto juga nameplate E/S ( PIX )
Rear panel
Foto panel tampak belakang
Main Busbar Area
Busbar condition
Bushing condition
CT on main busbar
Cubicle finish with
Checked by :
Approved by :
Share this template:

This post is also available in: Deutsch

Spot defects and issues with a final visual inspection checklist

Visual inspection is a common quality control method of inspection that uses only the naked eye to spot defects or issues. While it may seem like a less effective option than other types of inspection, a visual inspection can be a very effective way to improve the quality of products and keep your business running smoothly or your property operating properly

The visual inspection checklist is an important document that ensures that a product or piece of equipment is in the correct condition and meets the required standards. As each part of the report is completed, it enables the inspector to tick off a box, indicating that the part has been inspected and passed. This document is also an assurance to the client that the equipment has been properly inspected.

With the extensive and detailed final visual inspection template you can clarify factors as well as all essential questions related to the quality of the production. You can customize Lumiform’s visual inspection checklist to your needs. After completing the audit, you will receive an automatically generated report and you will be able to see sources of errors and problems at a glance.

Please note that this checklist template is a hypothetical appuses-hero example and provides only standard information. The template does not aim to replace, among other things, workplace, health and safety advice, medical advice, diagnosis or treatment, or any other applicable law. You should seek your professional advice to determine whether the use of such a checklist is appropriate in your workplace or jurisdiction.
This site is registered on as a development site. Switch to a production site key to remove this banner.